|
IN-FQ-01. How do I Install
Formulator?
Answer:
The CD contains complete Software in a
folder with name Formulator. Place
Software CD in CD Drive.Run SETUP Program from
Formulator folder to start Installation
and follow instructions displayed.
Enter
your Company Name
properly when asked for. It will be printed on top
of all outputs. Installation program will ask for
the Product Sr.No,enter this number the same way
as it is written on the software CD
By
default software is installed in "Ensoft
Formulator" subfolder in "Program
Files" folder of your C drive.
Although you can change the name of this folder
you are advised not to do so. The program files
are copied in the Formulator subfolder.
Installation
Program will create a "Ensoft Formulator"
subfolder in "Program"
menu of "Start" button.
Ensoft Formulator icon will be
created on Desktop.
IN-FQ-02.
How do I connect Hardware Lock?
Answer:Installing
BLUE COLOUR USB Lock Driver :- If you have received
a USB Lock with Blue Colour , then Insert Software
CD into drive & connect USB Lock in USB Port
- A
Dialog Box will display “Found
New Hardware Wizard”.
- Message
displayed in the dialog box is "Can
windows connect to windows update to search
for software upgrade ?"
-
"Select "No not this time".
- Next
Dialog box asks, “What do you
want the wizard to do? ” Select
"Install Software Automatically".Wait
for a while. Press "Finish"
to complete the installation.
- If
Windows can not locate USB Lock Driver files
Automatically then,select "I Will
choose the Driver to Install"
option instead of Install Automatically. Press
"Next".
- Press
"Have Disk" button
and Browse to the location of USBDrivers folder
in Software CD. Point to the
SentrUsb.INF file and Press
"Open" and "OK"
to continue.
- Press
"NEXT". Press
"FINISH" to complete installation.
- If
this procedure does not work, check if driver
is already present.
- Goto
Controlpanel -> SYSTEM -> Hardware
->Device Manager From the List check
whether "Hardware Lock"
item is present and has a Sentry USB Lock entry
with Question Mark. Right
Click with mouse and uninstall the Sentry Lock.
- Repeat
procedure from beginning to Reinstall USB Drivers.
Installing
WHITE Colour USB Lock Driver : - Insert
the Software CD
into the CD-ROM drive. Connect the USB Lock in the
USB port
- Wait
for a while. A message will be displayed,
"Found
New Hardware" “Your Hardware is installed
and Ready For Use”.
- Click
on the program from desktop icon, It will start
running.
- If
“Lock not installed” or “Unknown
error” message appears, install the drivers
as below.
- From
START button Go to Setting
> CONTROL PANEL Select SYSTEMS
> Hardware > Device Manager
- Check
at the list and count USB Interface devices
to whether the USB lock is detected.
- Double
Click at + Human Interface Devices.
- It
will display a list of USB Human Interface
Devices
- Right
click with mouse on each USB Human Interface
Devices entry, With Properties
option under General Tab,Check
which entry is for Location : Sentry HID Lock.
Go to Driver Tab and select UPDATE DRIVERS option.
- A
Dialog Box will be displayed “Welcome
to Hardware Update Wizard”.
Select "No not this time". And Press
next. A Dialog Box appears.
- Select
"Install from a list or specific location
(Advanced)" and press Next.
- Select
HIDDrivers Folder from Software
CD location in Browse and Press Next. Then Click
to Finish. Click on the Software program icon
from desktop, It will start running.
Installing
Parallel Port Lock Driver: - If you have
received a Parallel Port Lock with the software,
then look for a marking on end as COMPUTER. This
end shall be attached at backside of your computer,on
Parallel Port
- Run
Install Parallel Port Lock Driver
from Formulator
icon on the Desktop to install the Driver. Alternatively
- Goto
C:\Program Files\Ensoft\Formulator\
folder and double click on DrvInstall.exe program
to install the Driver
IN-FQ-03.
How do I Register ActiveX Component?
Answer: Formulator
comes with three Active-X Components namely EnGrid21.Ocx,
EnEdit21.Ocx and Cfx32.Ocx specially designed
for getting the data from the user easily. These
files are to be registered under Windows (with
RegSVR32.exe program of windows). Formulator installation
program will register the components automatically.
In case the installation program fails to register
these components a separate option Register Active-X
Components is provided under 'Utilities' menu
of main program. Run this option to register these
components.
IN-FQ-04.
How do I Install MS-Access Dao / Jet Engine?
Answer:
Formulator stores the data files
in Microsoft Access/ Office'97 format. Microsoft
Access module of Office'97/ Office2000 must be
installed on your computer. While installing MS-Office
2000 it asks 'Whether you want the backward compatibility
for MS-Access datafiles'. When this option is
asked for it is to be selected as Yes.
Microsoft
Access stores the Dao/Jet engine files in folder
C:\Program Files\Common Files\Microsoft
Shared\Dao.
If this folder is absent or Dao
is not compatible with Formulator
you need to install MS Access DAO / Jet Engine.
Formulator
CD contains a folder with name DaoInstall, which
contains the installation program for the DAO/ Jet
db Engine. If any one of the above messages appear
on the screen then run the SETUP program from the
Disk1 subfolder of the DaoInstall folder and follow
the instructions displayed by the Installation program.
This will install the Dao/jet engine properly on
your computer.
IN-FQ-05.
How do I Install Driver for Windows 2000/XP Machine?
Answer:
DrvInstall.exe program is provided alongwith to
install the drivers required make Formulator run
on computers with Windows 2000 / XP machine. To
run this program start Windows Explorer and go
to the folder where Formulator Software is installed.
By default the program is installed in C:\Program
Files\Ensoft Formulator\Bin folder. From the list
of program files displayed, double click on file
DrvInstall.exe. The Sentry driver Installation
dialogue box will appear on the screen. Now click
on the Install button. 'Successfully Installed
Sentrymsp.vxd' message will then appear on the
Screen.
Installation
of Formulator is now complete.
FORMULATOR.exe is the main program
for PROJECT QUANTITY ESTIMATION.
IN-FQ-06.
How do I run the Software?
Answer
: From Start button of Window'95/'98 or 2000/XP,
- Select
Programs menu and choose Ensoft
Formulator option. This will display
a submenu.
- Select
Readme.Txt option for reading
the information regarding the software.
- Select
FORMULATOR for running the
FORMULATOR software.
IN-FQ-07.What
are settings required for Windows 7 OR VISTA O.S?
Answer
: SETTINGS ALTERNATIVE 1:
From
START button Go to Setting
> Control Panel
Select Security Center > Other
Setting option
User account control to be turn OFF.
SETTINGS ALTERNATIVE 2:
From
START button Go to Setting
> CONTROL PANEL > User
account >
turn user account control off>
Uncheck checkbox for "use account
control to protect Computer"
Shut Down & Restart Vista O.S.
Start Running the Program.
|
Installation